144 Installing Symantec AntiVirus clients
Deploying installation packages using Web-based deployment
Setting up the Web server
To set up the Web server, complete the following tasks in the order in which
they are listed:
Copy the installation files to the Web server.
■
Configure the Web server.
■
Alternately, if Symantec AntiVirus server is installed on the Web server, you can
copy the files in the Web Install folder to the client installation folder on that
server, and then configure the Web server to use the client installation folder as
the virtual directory.
Copying the installation files to the Web server
The same procedure is used for Internet Information Server and Apache Web
Server.
To copy the installation files to the Web server
1
On the Web server, create a directory called Deploy.
2
Copy the Webinst folder from the Tools folder on the Symantec AntiVirus
CD to the Deploy directory.
3
Copy the Grc.dat and installation files to the Deploy\Webinst\Webinst folder
on the Web server from one the following locations:
The \\Server\Vphome\Clt-inst\Win32 shared folder on the Windows
■
NT-based computer that is running the server that you want to act as
the parent server
The \\Server\Sys\Sav\Clt-inst\Win32 shared folder on the NetWare
■
Server that is running the server that you want to act as the parent
server
4
Ensure that the default document for the virtual directory is Default.htm.
When you are finished, the folder structure on the Web server will look as
follows (note that all files are case-sensitive):
Deploy\Webinst
■
brnotsup.htm
■
default.htm
■
intro.htm
■
logo.jpg
■
oscheck.htm
■
plnotsup.htm
■