Advertisement
Monitor Controls and Indicators
1 These buttons are used to make adjustments to the monitor in the desired menu items.
2 These buttons display the CONTRAST ( ) /BRIGHT (
3 This button is used to display the main menu on your screen. This button is also used to select the menu items and to
activate the adjustment.
4 This button selects the INPUT 1 (video input 1 connector: y1) or INPUT 2 (video input 2 connector: y2) video input
signal.
5 This button switches the power on and off. The LED indicator lights up in green when the monitor is turned on, and
lights up in amber when the monitor is in power saving mode. If the monitor is in the power save mode and the power
is turned off with the power switch, it may take up to 10 seconds for the LED to go black.
Driver Installation
Use the monitor CD to install the appropriate monitor driver for your operating system.
The following OS messages might be slightly different from the actual message that appears on your PC, but the meaning
is the same.
Microsoft
To manually install or update the driver, perform the following steps:
1.
Insert the monitor CD into the CD-ROM drive.
2.
Click Start --> Control Panel --> Appearance & Themes and then click the Display icon.
3.
In the Display Properties window, click the Settings tab and then click Advanced.
4.
Click the Monitor tab, and then click Properties --> Driver tab --> Update Driver.
5.
When the Hardware Update Wizard dialog box appears, choose "Install the software automatically," and click Next>
and the Finish to complete the installation.
6.
Close the Display Properties window.
Microsoft
To manually install or update the driver, perform the following steps:
Click Start--> Settings--> Control Panel and then double-click Display.
1.
2.
In the Display Properties window, click the Settings tab, and then click Advanced.
3.
Click the Monitor tab, and then click Change--> Specify the location of the driver-->Next.
4.
When the Update Device Driver Wizard dialog box appears, select "Display a list of all the drivers in a specific
location, so you can select the driver you want," and click Next>.
5.
Insert the monitor CD into the CD-ROM drive, then click Have Disk...
6.
Type d:\ (change the drive letter to match your CD-ROM drive if it is not drive D) in the Copy manufacturer's files
from: box, then click OK.
7.
Click Next>, Next>, and then Finish to complete the installation.
8.
Close the Display Properties window.
2
Dell P1130 Color Monitor Quick Setup Guide
®
Windows
®
XP Operating System
®
Windows
®
Millennium Operating System
) menu. These buttons are also used to navigate the menu.
Advertisement
