Advertisement
Monitor Controls and Indicators
1.
Power button - Switches your monitor on.
2.
"OK" button - When pressed it will take you to the Main OSD Menu controls.
3.
Power Indicator - This light glows green during normal operation
4.
Brightness hotkeys - Pressing either Left or Right arrow directly will adjust screen brightness
(BRIGHTNESS control bar will appear on screen).
LEFT and RIGHT buttons - These are also used for adjusting other functions in the Main OSD Menu of
your monitor.
5.
Contrast hotkeys - Pressing either Up or Down arrow directly will adjust screen contrast (CONTRAST
control bar will appear on screen).
UP and DOWN buttons - These are also used for selecting other functions in the Main OSD Menu of your
monitor.
Driver Installation
Use the monitor CD to install the appropriate monitor driver for your operating system.
Microsoft Windows Millennium Operating System
To manually install or update the driver, perform the following steps:
1.
Click Start > Settings > Control Panel and then double-click Display.
2.
In the Display Properties window, click the Settings tab, and then click Advanced.
Click the Monitor tab, and then click Change! ! ! ! Specify the location of the driver! ! ! ! Next.
3.
4.
When the Update Device Driver Wizard dialog box appears, select "Display a list of all the drivers in a
specific location, so you can select the driver you want," and click Next>.
5.
Insert the monitor CD into the CD-ROM drive, then click Have Disk...
6.
Type d:\ (change the drive letter to match your CD-ROM drive if it is not drive D) in the Copy
manufacturer's files from: box, then click OK.
7.
Click Next>, Next>, and then Finish to complete the installation.
8.
Close the Display Properties window.
Microsoft Windows 2000 Operating System
To manually install or update the driver, perform the following steps:
1.
Click Start > Settings > Control Panel and then double-click Display.
2.
In the Display Properties window, click the Settings tab, and then click Advanced.
Click the Monitor tab, and then click Properties! ! ! ! Driver! ! ! ! Update Driver.
3.
4.
When the Update Device Driver Wizard dialog box appears, choose "Search for a suitable driver for my
device," and click Next>.
5.
Insert the monitor CD into the CD-ROM drive, type d:\ (change the drive letter to match your CD-ROM
drive if it is not drive D) in the Copy manufacturer's files from: box, and click Next> and then Finish to
complete the installation.
6.
Close the Display Properties window.
2
Dell M991 Color Monitor Quick Setup Guide
Advertisement
