Setting The Vehicle Parameters; Route Settings - Pioneer AVIC-U250 Owner's Manual

Checking and modifying the current route
1 Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
= For details of the operations, refer to Screen
switching overview on page 19.
2 Touch [More...], then [Settings].
3 Touch [Route Settings].
4 Touch [Vehicle], then touch the vehicle
type you use.
You can select from the following vehicle
types:
! Default Car:
Maneuver restrictions and directional con-
straints are taken into account when plan-
ning a route.
Roads are used only if access for cars is al-
lowed.
Private roads and resident-only roads are
used only if they are inevitable to reach the
destination.
Walkways are excluded from routes.
! Default Bus:
Maneuver restrictions and directional con-
straints are taken into account when plan-
ning a route.
Roads are used only if access for buses is
allowed.
Private roads, resident-only roads and walk-
ways are excluded from routes.
! Default Taxi:
Maneuver restrictions and directional con-
straints are taken into account when plan-
ning a route.
Roads are used only if access for taxis is al-
lowed.
Private roads, resident-only roads and walk-
ways are excluded from routes.
This system calculates the route optimized for
the new vehicle type. The orange line now
shows the new recommended route.

Setting the vehicle parameters

You can edit the parameters of the vehicle pro-
file.
1 Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
= For details of the operations, refer to Screen
switching overview on page 19.
2 Touch [More...], then [Settings].
3 Touch [Route Settings].
4 Touch [Vehicle].
5 Touch next to the vehicle profile that
you want to modify.
Chapter
08
43
En