Table of Contents
Advertisement
Chapter
08
Checking and modifying the current route
6
Scroll the list and touch any of the lines
to change the parameters.
! Name:
Touch this key to rename the profile.
! Fuel Consumption in Cities:
Enter the average consumption of your ve-
hicle when used in built-up areas. The unit
for consumption can be set in "Regional"
settings.
! Fuel Consumption on Highways:
Enter the average consumption of your ve-
hicle when used on freeways. The unit for
consumption can be set in "Regional" set-
tings.
! Engine Type:
Select the engine and fuel type of your vehi-
cle. This helps in estimating the CO
sion.
! Fuel Price:
Enter the average fuel price for travel cost
calculation. The currency can be set in "Re-
gional" settings.
! Max. Speed:
Set the maximum speed you travel with the
vehicle.
! Use Extended Settings:
Check this box to enable more settings for
the following parameters.
! Length:
Set the total length of the vehicle.
! Width:
Set the width of the vehicle.
! Height:
Set the height of the vehicle.
! Trailer:
Set if there is a trailer attached to the ve-
hicle.
! Maximum Allowed Weight:
44
En
Set the maximum allowed weight of the
vehicle.
! Actual Weight:
Set the actual weight of the vehicle.
! Freight:
Select one or more hazard types if the
vehicle carries dangerous material.
You can also set the following option:
! Confirm Parameters for Each Route Plan-
ning:
When enabled, the list of vehicle para-
meters always appears before route calcula-
tion. This helps you quickly adjust the
parameters when some of them (actual
weight, for instance) often change.
7
When finished modifying an existing
vehicle profile, touch [Back].
The settings are completed.
p While this profile is selected, the para-
meters of your vehicle are taken into ac-
count when planning routes.
Setting the route calculation
emis-
These settings determine how routes will be
2
calculated. Select the type of vehicle you are
driving, the road types used in route planning,
and the route planning method.
1
Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
= For details of the operations, refer to Screen
switching overview on page 19.
2
Touch [More...], then [Settings].
3
Touch [Route Settings].
4
Touch the setting item.
! Navigation Mode:
On-road navigation creates a turn by turn
itinerary using the road network on the
map. Switch to off-road navigation to navi-
gate between destinations in a straight line.
! Route Planning Method:
Advertisement
Chapters
Table of Contents
