Usb / Sd Operation - Elta 2383 Instruction Manual

Design music center with cd/usb/sd card mp3 player
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
PROGRAM
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
1. Press the "PROGRAM" button, the display will show "P01" and flash.
2. Select desired track by using the "SKIP +" or "SKIP -" button. ( You may select a desired album
by pressing "ALBUM UP" button. )
3. Press the "PROGRAM" button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the "PLAY / PAUSE / USB" button to
play the disc in the order you have programmed.
6. Press the "STOP" button twice to terminate programmed playback.
MODE
Press the "MODE" button before or during playing CD / MP3 / WMA disc,
each press switches the mode function as follows:
1 - REPEAT 1
2 - REPEAT ALBUM ( *MP3 / WMA ONLY )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK
REP
REPEAT 1
NORMAL
PLAYBACK
12.
REP
REP
ALBUM
ALL
REPEAT
REPEAT
ALBUM
ALL
RAND
RANDOM

USB / SD OPERATION

GENERAL OPERATION
PLAY / PAUSE / USB
Press to start playing tracks from the USB / SD card.
Press again to stop playing USB / SD operation temporarily.
Press again to resume playback.
SKIP +
& SKIP -
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
STOP
Press to stop all USB / SD operation.
PLAYBACK
1. Plug or slot in USB / SD card device to the port. (Make sure no disc on disc tray)
2. Set the "FUNCTION" selector to "CD / MP3 / WMA / USB / SD" mode.
3. Press and hold the "PLAY / PAUSE / USB" button for a few seconds to entry USB / SD mode.
4. Playback will start automatically from the first track.
5. Press the "STOP" button when finished.
6. Press the "PLAY / PAUSE / USB" button again, playback will start from the first track.
PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3 / WMA. Please refer to
CD / MP3 OPERATION.
SPECIFICATIONS
GENERAL
Power supply
: AC 230V ~ 50Hz
Frequency range : AM 525 - 1615kHz
: FM 87.5 - 108MHz
(Specification subjects to be changed without notice.)
13.

Advertisement

Table of Contents
loading

Table of Contents