Antenna Connection - Elta 2402N Instruction Manual

Antenna connection

Uncoil the FM wire antenna FM ANT. (17) on the rear of the device completely for best FM reception.
General Operating Instructions
On/Off
Set the FUNCTION (11) selector always to the OFF position, if the device is not used.
If the device is turned on, the POWER LED lights up red.
1. Select the mode with FUNCTION (11): OFF, CD or RADIO.
2. Adjust the volume with VOLUME (12) at the device.
3. Turn off the device by setting FUNCTION (11) to the OFF position.
Radio
1. Set the FUNCTION selector (11) to the RADIO position.
2. Select with the BAND selector (10) the frequency range: AM, FM (FM Mono) or FM ST. (FM Stereo).
3. Select the desired station with the ◄ TUNING ► rotary knob (13). The frequency can be read on the
frequency dial at the pointer position.
4. If the band selector is set to FM ST. (FM Stereo) and a stereo broadcast is received, the FM ST. LED in
front of the device lights up.
5. Adjust the volume with VOLUME (12) at the device.
FM Mono / Stereo
- Mono: Set the BAND selector (10) to FM.
- Stereo: Set the BAND selector (10) to FM ST. The FM ST. LED lights up.
Recommendations for better reception
FM: Uncoil the FM wire antenna FM ANT. (17) on the rear of the device completely for best FM reception.
AM: The device has a built-in AM antenna. Change the position of the device if reception is poor.
Disc (Audio CD)
The CD player can only play audio CD's. Never try to play MP3 CD's, Data CD's or VCD/DVD Discs.
Inserting a disc
1. Set the FUNCTION selector (11) to the CD position. On the display flashes "- -" and after a few seconds
"no" will be indicated.
2. Open the door of the CD drive by pushing on the symbol
display shows "- -".
3. Insert a CD with the cover side faced up.
4. Close the door of the CD drive manually. On the display "- -" flashes
and after a few seconds the total number of tracks (e.g. "20") will be
shown.
Removing a disc
1. Make sure the device is in the stop mode (
2. Open the door of the CD drive by pushing on the symbol
display shows "- -".
3. Remove carefully the CD upwards without touching the surface.
4. Close the door of the CD drive manually.
5. Store the removed CD in its cover.
/OPEN on the right side of the CD door. The
(8) button).
/OPEN on the right side of the CD door. The
INSERT A DISC
17.