Motorola MC70 Integration Manual page 98

5 - 8 MC70 Integrator Guide
Sounds
1. Phone Number
Select a ring type from the
2.
you receive an incoming call. Regardless of the ring type selected, a dialog box appears on the EDA's
display for incoming calls.
Select a ring tone for incoming calls from the
3.
ring tone, tap
NOTE To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to copy the
file to the /Windows/Rings folder on the EDA. Then select the sound from the ring tone list
Select a keypad tone from the
4.
when entering a phone number on the keypad.
Select
Short tones
keypad. Select
NOTE Turning off sounds saves power and prolongs battery life
Security
Enabling a PIN
NOTE Place emergency calls at any time, without requiring a PIN or a SIM card
To require a PIN when using the phone:
From the Phone tab
1.
Enter PIN
Figure 5-12
Use the touch keypad to enter a four to eight digit PIN.
2.
Tap to enable the PIN and return to the
3. Enter
automatically displays on the
drop-down list. The ring type changes the way the EDA rings when
Ring type:
. Tap to end the ring tone.
drop-down list. This selection determines the tone that sounds
Keypad:
or to specify the duration of the sound when you press a number on the
Long tones
to disable tones.
Off
(Figure 5-11), select the
tab when a live SIM card is installed.
Phone
drop-down list. To hear a sample of the selected
Ring tone:
.
Require PIN when phone is used
tab.
Phone
.
.
check box under
Security
.