Disassembly Procedures
!
Remove Screws
4. Lift control panel away from the dryer.
5. Remove two 5/16" screws holding coin drop mounting
plate.
Remove Screws
52
WARNING
Swing Out
and
Away
16022904 Rev. 0
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.
6. Remove two screws securing coin drop to mounting
plate.
Remove
Two
Screws
Front Panel
1. Disconnect power to the machine.
2. Remove the Service Panel and Control Panel.
3. Remove two T-20H screws secured into lower flange
of the upper Front Panel.
Remove Screws
4. Remove the two 5/16" hex head screws located in the
top right and left front corners of the Front Panel.
©2004 Maytag Appliances Company