Table of Contents
Advertisement
GENERAL SETTINGS
CHANGING THE PASSWORD
SETTING THE LANGUAGE
ANALYZER SERIAL NUMBER AND SOFTWARE VERSION
TIME AND DATE
The analyzer settings,
common for all mea-
surements, are grouped
in "General Menu".
The password is a numeric value with 4 digits.
To change the password, enter in "General Menu" - "System
Functions" and edit the "Change Pass" line. Press "CFM" to
save.
After new value is confirmed, the displayed password is set to
0000 for protection against unauthorized reading.
The PCA 311-331 analyzers has 4 languages stored inside.
The user could easily change the language without restarting
the analyzer.
To select a new language, enter in "General Menu" - "Language
Change" and select the new language. After pressing "CFM"
key, the new language is loaded.
The unique serial number can be viewed by selecting the
"General Menu" - "System Functions" - "Serial Nr.".
Serial number is not editable.
The software version is displayed each time the analyzer is
turned on and lasts during the initialization phase.
The PCA 311-331 analyzers have a built in real time clock.
When the analyzer is in normal mode, the current time is
displayed on the right side of the display in HH:MM format.
To set the time and
date, select the "Gen-
eral Menu" - "Time
and Date". Set the time
and the date as de-
scribed in the User in-
terface chapter.
System Log
Analog Output
SMS Settings
Serial & GSM Comm.
Time and Date
System Functions
Language Change
Set Time:
Set Date:2004/01/01
10:31
3 3
Advertisement
Table of Contents
