Table of Contents
Advertisement
Pressing "RIGHT" or "LEFT" arrow keys, another parameter
can be set.
Pressing "ESC" key will return to menu.
Note:
If the edited value is outside the allowed range, a warning
panel appears when "CFM" is pressed. This panel contains
the parameter limits. Pressing again "CFM" or "ESC" will
return to the edit mode.
PROGRAMMING THE ANALYZER
The parameters are stored in a nonvolatile EEPROM memory. If
a power failure appears the settings are restored after power on.
When power is first time applied to PCA 311-331 analyzers,
the parameters are set to factory default values.
3 2
Advertisement
Table of Contents
