Startup - Hanna Instruments PCA 311 Instruction Manual

STARTUP

Note:
Note:
2 6
To power up the analyzer open the electronic
box door and turn on the main switch.
When the analyzer is powered up, the display
backlight is turned on and the initialization take
place. In this phase, the integrity of the stored
data is checked and the information regarding
the language is loaded.
The display will show HANNA INSTRUMENTS, the name of
the instrument and the software version.
HANNA
PCA 311 Ver. 1.0f
Loading language..
The instrument will display at startup PCA 311, PCA 321 or
PCA 331.
After initialization, the analyzer will show the main panel (or
bromine measuring panel for PCA 311). The measured
values are displayed. The bromine concentration will be
updated only after a full measuring cycle. The first reading is
0.0 mg/L and the dosing relay is not active.
After the first bromine concentration is measured and displayed,
the bromine dosing relay is activated if necessary.
If the SMS feature is selected and correctly configured, the
analyzer will send a SMS at each power up sequence.
INSTRUMENTS
Bromine