C364Main Board Unit Removal - Epson Stylus PHoto 875DC Service Manual

EPSON Stylus PHOTO 875DC

4.2.3 C364MAIN Board Unit Removal

This section describes how to separate the C364MAIN Board (card reader
part) from the printer part.
1. Remove HOUSING. (Refer to Section 4.2.1.)
2. Remove the C364MAIN Board. (Refer to Section 4.2.2.)
3. Release the harnesses (for USB and C364PSB/PSE) from the locking
wire saddle attached to the C364MAIN Board.
Locking Wire Saddle
Figure 4-8. C364MAIN Board Removal (1)
DISASSEMBLY AND ASSEMBLY
Harnesses
CBS (3x6)
dis09
Disassembly Procedures
4. Remove the four screws (CBS, 3x6) securing the C364MAIN Board
Unit. (See Figure 4-8 and Figure 4-9.)
CBS (3x6)
Figure 4-9. C364MAIN Board Removal (2)
5. Remove the two screws (CBS, 3x6) securing the panel unit to the
C364MAIN Board.
6. Release the two dowels fixing the C364MAIN Unit to the printer part
and the one fixing the panel unit to the C364MAIN Unit, and remove
the C364MAIN Unit.
Revision A
dis10
36