Read Only Mode] Function; Write To Disk Mode] Function; Switching To [Write To Disk Mode]; Media Insertion / Removal - Epson Stylus PHoto 875DC Service Manual

EPSON Stylus PHOTO 875DC

1.4.3.6 [Read Only mode] function

When [Read Only mode] is selected (default), the driver operates the
media that is inserted to the card reader as the "Write Protect".

1.4.3.7 [Write to Disk mode] function

The following function is supported in [Write to Disk mode].
1. Read/Write for long file name (8+3 characters or more)
2. Format
3. Delete file
4. Change file attribute
5. Make file
6. Rename file
7. Make folder
8. Delete folder
9. Rename folder
10. Memory of the Folder condition (location, size etc)*
NOTE: Not able to acquire the information that is whether the file is
opened by the restriction of File Exchange of the MacOS 8.5.1
belonging.

1.4.3.8 Switching to [Write to Disk mode]

"
Switching between [Read Only mode] and [Write to Disk mode] is
bidirectionally possible.
"
Mode change is implemented in condition without the media being
mounted. The mode change is carried out by the implementation of
the application software "EPSON USB RW Switcher".
"
The change result comes into effect at the time of the next media
mounting.
"
The mode information is stored to the initial setting file (EPSON
PhotoStarter pref).
PRODUCT DESCRIPTIONS

1.4.3.9 Media insertion / removal

"
The icon and volume name (untitled, etc.) are displayed on the
desktop when the PCMCIA media is inserted into the card reader.
"
In the case that the media is removed, the disk should be un-mounted
without fail. (Drag the icon on the desktop in the garbage can, or Click
[Eject] on [Special] menu.)
"
When the un-mounting is carried out normally, the message "The
memory card can be removed from the card drive. Please remove the
memory card." is displayed and the icon disappears from the desktop.
!
In the case that media is removed without un-mounting,
the warning message is displayed immediately. At this
time, replace the media in the drive immediately. There is
the possibility that the system becomes unstable and the
data be lost if the media is not replaced in the drive.
!
In the case that USB cable is pulled out without un-
mounting, the warning message is displayed
immediately. At this time, reconnect the cable to the port
immediately. There is the possibility that the system
becomes unstable and also the data be lost if the cable is
not reconnected to the port.
Function
Revision A
17