EPSON EPL-N1600 / Duplex Unit
4.2.1 Duplex Unit Removal
1. Switch OFF printer power and remove the AC power cord from the
rear of the printer.
2. Disconnect all interface cables from the rear of the printer.
3. Remove the 500 Sheet Feeder, if one is installed.
4. Push the Vertical Unit release lever to the rear (1) and tilt the
Vertical Unit away from the printer (2).
5. Press the Feeder Joint Clips together and remove the two rear
feeder joints securing the Duplex Unit to the Printer.
6. Remove the 250 Sheet Cassette and the Chute Assembly (4).
7. Press the feeder joint clips together and remove the two front feeder
joints securing the Duplex Unit to the printer (5).
8. Lift the base engine off of the Duplex Unit.
Rev. 0
Chapter 4
DISASSEMBLY AND ASSEMBLY
Figure 4-1. Duplex Unit Removal
F4-1a
F4-1b
25