Rolls Pinch & Roll Assembly Exit - Epson EPL-N1600 Option Service Manual

EPSON EPL-N1600 / Duplex Unit
4.2.9 Rolls Pinch & Roll Assembly Exit
1. Remove the Duplex Unit.
2. Remove the Chute Upper.
3. Remove the Duplex Assembly Unit Vertical.
4. Remove the Chute Cover.
5. Remove the Fan Assembly Duplex.
6. Remove the three screws that secure the Bracket Fan to the Chute
Upper 2 and Plate Tie.
7. Remove the E-rings from both ends of the shaft of the Roll
Assembly Exit.
8. Remove the Bearing from the right end of the shaft.
9. Remove the Gear and Bearing from the left end of the shaft.
10. Slide the shaft to the left until the right end is freed from the Frame.
11. Slide the shaft to the right and out of the Frame.
12. Press down each Roll Pinch clip and remove the three Pinch Rolls
from the Chute.
Rev. 0
Chapter 4 DISASSEMBLY AND ASSEMBLY
Figure 4-9. Rolls Pinch/Roll Assembly Exit Removal
F4-
33