Event Log File Scrolling - Hanna Instruments HI 504 Instruction Manual

EVENT LOG FILE SCROLLING

The event log file is composed by a maximum of 100 re-
corded events, which include errors, calibration events (type
of calibration, date, time), configuration changes and clean-
ing events (type of cleaning, start date and time).
To enter the event log file scrolling, press the LCD key while in
control, hold or idle mode (the log feature is not available in
setup or calibration mode). Event scrolling does not affect
control actions, which continue normally.
If there is no event in the event log file, nothing happens
when the LCD key is pressed.
Otherwise the primary display will show
the code of the last logged event while
the secondary LCD will show the num-
ber (index) of the event.
For each event the following is reported in any case:
• error code (displayed "Er" followed by the error number)
or setup item code (displayed "S" followed by the setup
item code) or "CALE" indication or "CLEA" indication;
• event index (the oldest event has index 0, the latest event
has the higher index) shown on the secondary LCD.
In addition, the following information can be visualized:
• for errors:
and if error is not on anymore:
• for configuration changes:
• for calibrations:
90
• start date
• start time
• end date
• end time.
• date of change
• time of change
• previous value
• new value
• date of calibration
• time of calibration
• calibrated unit ("pH", "OrP", "°C", "4-20",
"UoLt", "0-20 ", "4-20 ", "0-20 ", "4-20
1 1 2
")
2
• for cleaning events:
• start date
• start time
• type of cleaning ("AdCL" for advanced
cleaning; "SICL" for simple cleaning).
Once entered the log event scrolling, press the æ or
move through the events.
If the event is an error still active, the error code on the pri-
mary LCD will blink, otherwise it will be fixed.
To have a look at the additional information of a selected
event press the key (it will cycle through the additional
information).
Note
To exit the log event scrolling, press the LCD key.
Note
The logged event information can be downloaded to a PC
through the HI 92500 application software.
key to
91