Epson FX-2170 Service Manual page 109

Disassembly and Assembly
3.3.3 Removing the Paper Eject Assembly Cover
1. Remove the paper eject assembly cover by releasing 2 clips located along both edges of the paper
eject assembly cover, as shown in the following figure.
Cover, Paper Eject Assy.,
Figure 3-48 Removing the Paper Eject Assembly Cover
When attaching the paper eject assembly cover to the CSF unit, pay attention to the position of 2
pieces of thin plastic film glued on the reverse side of the paper eject assembly cover, as shown in
the following figure.
Thin Plastic Film
Figure 3-49 Assembling the Paper Eject Assembly Cover
3-30
FX-2170 Service Manual
Rev.A