Table of Contents
Advertisement
2. PREVENTIVE MAINTENANCE INSTRUCTIONS
Gate Operator
Cover (in place)
Cover
Mounting
Bolt
(4 places)
Gate Operator Serial Number:
•
Refer to Figure 23 to perform the following.
1. Turn off power to the gate operator at the circuit breaker.
2. Remove the cover mounting bolts and remove the gate operator cover.
3. Perform preventive maintenance tasks 3 to 14, above.
4. After completing all checks, perform the procedure found in Part 2, System
Installation, Paragraph M, Post Installation Procedures.
Rev J
Clear Plastic
Cover
Control
Box
Figure 23. Gate Operator Disassembly and Assembly.
Doc 01-20098
Gate Operator
Cover
UPS: Yes
No
Page 32 of 44
Advertisement
Table of Contents
