3.2 Dismount magnet and lever
3.3 List of assembly parts
8
1
2
3
4
5
–
Loosen screws 1 and 2.
–
Take off magnet holder 3 .
Attention!
Do not dismount the potentiometer because otherwise the
potentiometer has to be adjusted anew.
Take off magnet 4 .
–
Remove the cable of the magnet from the connection box.
–
Remove lever 5 .
–
Mount the magnet holder 3 without magnet 4 with the screws 1
and 2 again.
The following assembly parts have to be mounted:
–
2 solenoid valves
–
Tension plate
–
Thread tension
–
Hoses and cables