Mounting And Connecting The External Operating Panel C300; Mounting And Connecting The Proximity Switch - Duerkopp Adler 609 Instruction Manual

6.1.2

Mounting and connecting the external operating panel C300

2
6.1.3

Mounting and connecting the proximity switch

1
–
Screw the external operating panel 2 on the mounting bracket 1.
–
Screw the mounting bracket 1 laterally on the machine head.
–
Bring the connection cable downwards through the cutout in the
table plate .
–
Connect the connection cable with the extension cable and plug it
into the corresponding socket of the control unit.
–
Push the proximity switch 3 onto the flange of the hand wheel.
–
The groove in the proximity switch housing must engage over the
twist protection of the belt guard.
–
Tighten both stud bolts on the proximity switch ring.
–
Bring the connection cable downwards through the cutout of the
table plate.
–
Plug the connection cable into the corresponding socket of the
control unit .
1
GB
3
13