Sewing Patterns - Duerkopp Adler 530 Operating Instructions Manual

8.4 Sewing patterns

Three different sewing pattern types are available for the button
sewing automat 530:
·
Specified standard sewing patterns (Type 1) (see chapter 11)
The sewing parameters length, width and sewing speed can be
altered in the sewing mode; the laser marking lamps can be
switched on and off. The alterations are memorized.
However, after selection of another sewing pattern the alterations
will get lost.
For these sewing patterns the sewing pattern numbers 1 to 50 are
available which cannot be deleted or overwritten.
·
Programmable sewing patterns (Type 2)
Specified standard sewing patterns can be altered in the
programming level (length, width, sewing speed, laser light 1 to 8)
and memorized under a new program number.
For these sewing patterns the sewing pattern numbers 51 to 90
are available which can be deleted or overwritten.
·
Free seam contours (Type 3)
For these seam contours the sewing patterns numbers 91 to 99
are available. The creation of free seam contours is described in
chapter 8.5.4.4.
The sewing parameters length, width and sewing speed can be
altered in the sewing mode; the laser marking lamps can be
switched on and off. The alterations are memorized.
However, after selection of another sewing pattern the alterations
will get lost.
1
23