Numbering Of Menu Items - Duerkopp Adler 530 Operating Instructions Manual

13. Numbering of menu items

Parameter English (displayed on the screen)
off/a
0
on/b
1
yes
D01
no
D02
canc
D03
D04 ok
Q01? Initialize variants and
sequencesquestion
Q02? Initialize machine
Q03? Initialize free contoursquestion
Q04? Initialize machine complete?
Q05? continue?
T1 machine
T1.1 parameter
T1.1 PWM output test
T1.1.1 cut.rpm
T1.1.2 max.rpm
T1.1.3 stop pos.
T1.1.4 sew.st.pt.
T1.1.5 ref.freq.
T1.2 soft start
T1.2.1 1.stitch
T1.2.2 2.stitch
T1.2.3 3.stitch
T1.2.4 4.stitch
T1.2.5 5.stitch
T1.3 equipment
T1.3.1 w.clamp f.
T1.3.2 open dimens.
T1.3.3 number
T1.3.4 length
T1.3.5 width
T1.3.6 configuration
T1.3.6.1 hand sw.
T1.3.6.2 el.wiper
T1.3.6.3 _/-clamp
T1.3.6.4 laserl.
T1.3.6.4.1 no.laser
T1.3.6.5 opt.signalling
T1.3.6.5.1 opt.sign.
T1.3.6.6 input alloc.
English (meaning)
off/a
on/b
yes
no
cancel
OK
Initialize variants and sequencesquestion
Initialize machine
Initialize free contoursquestion
Initialize machine complete?
continue?
machine
parameter
PWM output test
cutting speed
maximum sewing speed
stop position
sewing start position
referencing frequency
soft start
1.stitch
2.stitch
3.stitch
4.stitch
5.stitch
equipment
working clamp foot
open dimensions
number
length
width
configuration
hand switch
electrical wiper
separated clamp foot
laserlights
number of laserlights
optical signalling
optical signalling
input allocation
1
93