Blackout Mode On And Off; Demonstration; Switching Display Modes - Alpine IVA-D901 Owner's Manual

DEMO
2
Rotary encoder
WIDE/DISP.
SOURCE/POWER

Blackout Mode On and Off

When Blackout mode is turned on, the display will turn off to reduce
power consumption.
This additional power enhances the sound quality.
Press and hold MUTE/DISP. OFF for at least 2
seconds to start the blackout mode.
By doing so the display will turn off.
• If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.
To cancel Blackout mode, press and hold MUTE/DISP. OFF for
at least 2 seconds.

Demonstration

This unit has a Demonstration feature which simulates the display
functions.
1
Press and hold DEMO for at least 2 seconds.
Each press toggle between DEMO ON and DEMO OFF.
2
Press and hold DEMO for at least 2 seconds to
return to normal operation.
26
-EN
MUTE/DISP. OFF
SPE.ANA.

Switching Display Modes

After carrying out the steps 1 to 3 of "To display the DVD mode
Screen" explained on page 28, perform the operation described below.
Press and hold WIDE/DISP for at least 2 seconds in
the visual source.
Each press changes the display modes as follows:
MODE 1 → MODE 2 → MODE 3 → MODE 1
(WIDE) (NORMAL)
MODE1
In Mode 1 (Wide), the monitor displays a normal picture wider
to fit in a wide-screen monitor by evenly stretching out the
picture horizontally.
MODE2
In Mode 2 (Normal), the monitor displays a normal picture at
the center of the screen with a vertical black band at each
side.
MODE3
In Mode 3 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode
is good for displaying a cinema type picture at the 16 : 9 ratio.
(CINEMA) (WIDE)