Switching Display Modes; Switching The Visual Source Only (Simultaneous Function); Canceling The Simultaneous Function; Blackout Mode On And Off - Alpine IVA-W520E Operating Instructions Manual

Internal MP3/WMA/AAC Player/external MP3-compatible
DVD Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
appears only when a file is present in the selected folder.)
The file list screen is displayed.
• Touch [ ] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.

Switching Display Modes

While your vehicle is parked, touch [WIDE] on the visual
source screen.
Each touch changes the display modes as follows:
Mode 1 Mode 2
(WIDE) (CINEMA)
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16:9 ratio.
In Mode 3 (Normal), the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.
]. ([ ]
Mode 3 Mode 1
(NORMAL) (WIDE)
Switching the Visual Source Only
(Simultaneous Function)
You can watch the video portion of another source while listening to the
current source.
1
Press VISUAL on the unit.
The VISUAL selection screen appears.
2
Touch a desired visual source.
The visual source is switched to the selected one.

Canceling the Simultaneous Function

1
Press VISUAL on the unit.
The VISUAL selection screen appears.
2
Touch [Normal].
The simultaneous function is cancelled.
• If a DVD player is connected, you can receive the DVD picture/
sound.
DVD changer (DHA-S680E) is connected:
Press and hold V.OUT on the remote control supplied with the DVD
player or DVD changer for more than 2 seconds. The picture and
sound of the DVD will be output.
The DVA-5210 is connected:
Press V.OUT on the remote control (included with the DVA-5210) to
output DVD picture/sound.
• The simultaneous function cannot be used when the Audio source is
in the navigation mode.

Blackout Mode On and Off

When Blackout mode is turned on, the monitor display will turn off to
reduce power consumption.
This additional power enhances the sound quality.
1
Press VISUAL on the unit.
The VISUAL selection screen is displayed.
2
Touch [Off].
The backlit-display portion goes out.
3
Touch [Off] again to cancel the display backlight.
• If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
23
-EN