Connecting External Equipmen - Alpine IVA-D901 Owner's Manual

When Connecting External Equipment
IVA-D901
1
Tuner BOX
EQ/DIV
NORM
2
POWER SUPPLY
REMOTE IN/OUT
NAVIGATION IN
DISPLAY OUT
7
REMOTE OUT(AUX3)
(White/Brown)
!
REMOTE IN(AUX1)
(White/Brown)
!
REMOTE IN(AUX2)
(White/Brown)
9
REVERSE
(Orange/White)
1 System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.
• Be sure to turn the power off to the unit before changing the
switch position.
2 Remote IN/OUT Terminal
3 AUX Video/Audio Output (AUX2) Terminal
Use when connecting an optional monitor etc.
4 AUX Video/Audio Output (AUX1) Terminal
Use when connecting an optional monitor etc.
5 AUX Video/Audio Input (AUX3) Terminal
6 CAMERA Input Terminal
Use when connecting a back-up camera.
7 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This
lead outputs the controlling signals from the remote
control.
SUB W.
PRE IN/OUT REAR
FRONT
3
4
Ai-NET
VIDEO
AUX OUT L
AUDIO
R
VIDEO
(MONO)
AUX IN 1/2 L
5
AUDIO
R
CAMERA IN VIDEO
(MONO)
AUX IN 3 L
AUDIO
R
RADIO ANTENNA IN
6
(White/Brown)
REMOTE IN
REMOTE OUT
(White/Brown)
REMOTE OUT
(White/Brown)
Use only when back-up camera is connected.
To Audio Input terminal
8
To Video Input terminal
To Video Input terminal
8
To Audio Input terminal
To Video Output terminal
8
To Audio Output terminal
To Video Output terminal
8
8 RCA Extension Cable (Sold separately)
9 Connect to the plus side of the car's reverse lamp
which lights when the transmission is shifted into
reverse (R).
Switches the video picture to the back-up camera.
This is linked to putting the car into reverse (R).
! Remote Control Input Lead (White/Brown)
Rear monitor 1
(Sold Separately)
Rear monitor 2
(Sold Separately)
TV Tuner or VCR
(Sold Separately)
Back-up camera
(Sold Separately)
75
-EN