Tips For Installation - CDA HVC 32 Manual For Installation, Use And Maintenance

Touch control vitroceramic cooking hob
Table of Contents

Advertisement

18

TIPS FOR INSTALLATION

Installation
CAUTION:
This appliance shall only be serviced by authorised personnel.
– This appliance is to be installed only by an authorised person according to the current local
regulations and in observation of the manufacturer's instructions.
– Incorrect installation, for which the manufacturer accepts no responsibility, may cause
personal injury of damage.
– Always disconnect the cooktop from mains power supply before carrying out any
maintenance operations or repairs.
WARNING !
– We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand
temperatures not less than 150 °C to avoid delamination.
– The appliance must be housed in heat resistant units.
– The walls of the units must be capable of resisting temperatures of 75 °C above room temperature.
from top of countertop
45,2 mm
to bottom metal cover
A
from top of countertop
63,5 mm
to terminal block
(1): at least 50 mm between the back side of the
cut-out and the back of the countertop.
Fig. 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvc 32 series

Table of Contents