Table of Contents
Advertisement
How to Use the Touch-Control
Notes:
– Each selection (by pressing one of the keys) is indicated by an acoustic
signal (beep).
– If the environmental light conditions are excessive (e.g. halogen hood
light/s on), the user interface operation could be stopped (the displays
F
L
show "
" and "
" alternating - error message "
light conditions will be recovered.
In this case the direct environmental light/s must be switched off before
operating the cooktop.
– Any time the cooktop is connected to the electrical supply or
after a power failure, the safety key-lock protection will be
automatically activated (indicator light ON above key
Before starting to use the cooktop deactivate the key-lock
protection by pressing the key
This operation is necessary for the keyboard calibration, to
adapt the sensibility of the keys (do not use gloves, use a clear
finger).
– If an object is positioned on the touch control area, or in the case of spillage
of liquids on control keys, the touch control is switched off automatically
10 seconds after having detected the object/liquid.
– When the touch control reaches an ambient temperature above 96°C, one
heating element is switched off. This element cannot be used until the
temperature falls below 89°C.
F L
") until the correct
) .
.
9
Advertisement
Table of Contents
