Replacing The Battery - UNI-T UT203 Operating Manual

Model UT203/204: OPERATING MANUAL
B. Replacing the Battery (see figure 10)
Warning
To avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery
as soon as the battery indicator "
Make sure the transformer jaw and the tets leads are
disconected from the circuit being tested before
opening the case bottom.
To replace the battery:
1. Turn the Meter off and remove all the connections from the input terminals
2. Turn the Meter's front case down.
3. Remove the screw from the battery compartment, and separate the battery
compartment from the case bottom.
4. Take out the old battery and replace with a new 9V battery (NEDA1604, 6F22 or
006P.
5. Rejoin the case bottom and the battery compartment, and reinstall the screw.
This operating manual is subject to change without notice.
" appears.
** END **
45
Screw
(figure 10)