C.replacing The Battery; Battery Replacement - UNI-T UT804 Operating Manual

Bench type digital multimeter
Table of Contents

Advertisement

Model UT804: OPERATING MANUAL
C. Replacing the Battery
Figure 6-2. Battery Replacement
Warning
To avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery
as soon as the battery indicator "
when the Meter is under battery operated siutation.
When the Meter is under battery operated siutation,
battery cannot be re-charged.
Make sure the test leads are disconnected from the
circuit being tested before opening the case bottom.
Follow Figure 6-2 and proceed as follows to replace
the battery:
l
Switch off the Meter, disconnect the power cord and
remove all connections from the terminals.
l
Use the coin to open the compartment at the case
top, and separate the compartment from the case
top.
l
Replace with a new 6F22 9V battery.
l
Rejoin the case top and compartment and close the
compartment.
" appears
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents