Certified Installation; Methods Of Installation - Dometic RM1303 Installation And Operating Instructions Manual

CERTIFIED INSTALLATION

Certified installations require one roof vent and one lower side
vent.
Certified vent system kits, see separate list.
For further information contact your dealer or distributor.

METHODS OF INSTALLATION

The
methods of installation are shown in figure 10.
It is essential that all maximum or minimum dimensions are
strictly maintained as the performance of the refrigerator is
dependent on an adequate flow of air over the rear of the
refrigerator.
VENTlLATlON HEIGHTS
Installation with roof
vent and tower side vent
Refrigerator
RM763
RM1303
CLEARANCES
Minimum clearances in inches to combustible materials are
G: Top 0
K: Side 0
L: Bottom 0
M: Rear 1
Clearance M between the rearmost part of the refrigerator and
the wall behind the refrigerator.
Clearance N on top of the condenser is related to the minimum
ventilation height.
See Fig 11,12 and examples below
Refrigerator Overall
model dimesions
Height Width
A B
RM763 52 23
RM1303 57-15/16 6 24-15/16 24- 1 1 / 1 6
This method of installation and these clearances s will give you adequate space for servicing and for proper operation.
EXAMPLES
The clearance N for the RM763 model is derived at in the follow-
ing way
Installation with roof vent and lower side vent
Minimum ventilation
heights in inches
56
62
Installation
dimensions
Depth Height Width
C H W
2411/16 51-3/16 21 9/16
23 7/16
Fig. 12
Fig. 11
Recess
dimensions
Height W i d t e h
Depth
D H W
22-3/4 51-3/8 21-13/16 23-3/4
22-3/4 57-1/2 23-13/16 23-3/4
N=Minimum ventilation height 56 minus installation height
51 3/16 plus distance between condenser top and refrigerator top
1/8 plus distance between roof surface and roof vent cap 5 1/4
N=56-51 3/16+1/8+5 1/4=10 -3/ 1 6
Condenser
Distance between
top of condenser to
top of refrigerator
Depth
D
E
1/8
1/8
6