Installer Setup - Trane TCONT802AS32DA Installation Instructions Manual

TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION

INSTALLER SETUP

The comfort control works with many different system
types. To operate correctly, the comfort control must be
set up to operate the installed heating and/or cooling
system.
Follow these steps to enter the Installer Setup:
1. Be sure the comfort control is powered.
2. Press and release the System Key.
FAN
ON Inside
AUTO
SYSTEM
EM HEAT
OFF
COOL
SCHED
3. Press and hold the two blank keys on either side of
the center blank key for approximately five seconds
until screen changes.
MO TU
Inside
SYSTE
M
EM
HEAT
OFF
DONE
THU
Set To
Following
Schedule
A
M
HOLD CLOCK SCREE
WE TH FR SA SU
Set To
Following
Schedule
CANC
M22648
4. Release the two blank keys when the screen on the
comfort control matches the screen below.
M22647
5. See screen below to review how the comfort control
keys are used during Installer Setup. See Table 4
for the Installer Setup Numbers and Settings.
INSTALLER
SETUP
NUMBER
PRESS TO EXIT
INSTALLER SETUP
6. Press the Done key to exit the Installer Setup
screen.
11
DONE
ADVANCE TO NEXT
INSTALLER SETUP
MON WED THU U FRI SAT A A T A
DONE O
CHANGE THE
CURRENT
SETTING
Pub. No. 18-HD25D19-3
M22649
CURRENT
SETTING
SUN
M22650
69-1790—3