Copying Functions; Making A Copy - Canon iR2022 Easy Operation Manual

Copying Functions

Making a Copy

The following is an explanation of the basic procedure for copying a document. For more detailed procedures, see
the references to other guides.
Prepare
Press [Copy] to switch to the Copy
mode.
Copy Standby Display
If the machine is in the Sleep mode, press
[Power].
If the message <ENTER DEPT. ID> appears,
enter the Department ID and password.
If the message <ENTER USER ID> appears,
enter the User ID and password.
If the message <NO CONTROL CARD/INSERT
CONTROL CARD> appears, insert a control card.
For more information, see Chapter 2, "Basic
Operations," in the Reference Guide.
9
Place Your Originals
Place in the feeder
Place on the platen glass
Place your originals.
Close the feeder/platen cover after placing your
originals.
If necessary, set the copy modes with the physical
keys for copying, or Additional Functions key.
For more information on the basic copy features,
see p. 11 to p. 14. For more information on the
optional copy features, see p. 15 and p. 16.
To set the various copy modes, press
[Additional Functions] and select <COPY
SETTINGS>.
For more information on the copy modes you
can set from the Additional Functions menu, see
p. 8 in the Easy Operation Guide (To Suit Your
Needs).
You can also place paper in the stack bypass
to copy. (For more information, see Chapter 2,
"Basic Operations," in the Reference Guide.)
For details about the size and type of paper, see
Chapter 2, "Basic Operations," in the Reference
Guide.
Specify the Number of Copies
1 2 3
4 5 5 6
7 8 9
#
0
ID C
Enter the desired number of copies (1 to 99)
with the numeric keys.
If you make a mistake when entering values, press
[Clear] enter the correct values.
The number of copies you specify is displayed
on the right-hand side of the LCD display.
To Cancel Copying
Press [Stop].
• If you press [Stop] during scanning
• Press [OK].
• If you press [Stop] during printing
• Press to select <YES>.
Making a Copy
Start Copying
1 2 3
4 5 5 6
7 8 9
#
0
ID C
Press [Start].
When a message appears on the LCD display,
press or to select the size, and press
[Start] again.
When copying is complete, remove your originals.
10