Last Function Memory; Resetting The Microprocessor - Denon CEOL Piccolo DRA-N5 Owner's Manual

Using the cursor buttons
1
Display the screen for inputting
characters.
2
Use o p to set the cursor to the
character you want to change.
3
Use ui to change the character.
• The types of characters that can be input are as shown below.
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GUpper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! " # $ % & ' ( ) z + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
GNumbersH 0123456789 (Space)
• The input character type can be switched by pressing
display name is being changed.
CLEAR
• Press to delete the character.
9
• Press to insert a space.
4
Repeat steps 2 and 3 to change the name then press
ENTER to register it.
Auto power on function
When you press INTERNET
RADIO ONLINE MUSIC
,
SERVER , iPod , AUX , USB
FAVORITE CALL
, the corresponding
device is turned on and the source
automatically switches.
1 3
• When you press /
selected source is played back.
+10
while the

Last function memory

This stores the settings as they were immediately before going into
the standby mode.
MUSIC
,
When the power is turned back on, the settings are restored to as
, 1 / 3 or
they were immediately before going into the standby mode.

Resetting the microprocessor

, the previously
Perform this procedure if the display is abnormal or if operations
cannot be performed.
When the microprocessor is reset, all the settings are reset to their
default values.
If "Initialized" does not display in step 3, start over from step 1.
41
1
Pull the power cord out of the power outlet.
2
Plug the power cord into a power outlet while
VOLUME df
pressing on the main unit.
3
When the power indicator lights white, release the
buttons.
"Initialized" appears in the display.
Other functions