Denon CEOL Piccolo DRA-N5 Owner's Manual page 14

Clock
You can automatically adjust the clock of this unit using the Internet.
To use this function, the unit must be connected to the Internet.
n Setting the Time Zone
When changing the time zone, use the following procedure to
select your local standard time (time zone).
1
Press SETUP .
Turns on the Menu settings mode
and the Menu appears on the display.
(vpage 9 "Menu map")
2
ui ENTER
Use and to select
"General" – "Clock" – "Auto-
Adjust" – "Time Zone", then
ENTER p
press or .
"Time Zone" menu appears.
3
Use ui to select your time zone, then press
p
or .
4
Use ui and ENTER to select "Auto-Adjust" –
ENTER
"Adjust Now", then press
The setting is entered.
n Setting the DST (Daylight Saving Time)
Use the following procedure to set DST if the DST system is used
in your country.
1
SETUP
Press
Turns on the Menu settings mode and
the Menu appears on the display.
2
Use ui and
"General" – "Clock" – "Auto-
Adjust" – "DST", then press
ENTER p
or
"Select DST" menu appears.
3
Use ui to select "Off (0H)" or "On (+1H)", then
ENTER
press
4
ui
Use
"Adjust Now", then press
The setting is entered.
ENTER
n Auto Adjust
Use the following procedure to automatically adjust the clock.
1
Press SETUP
Turns on the Menu settings mode
p
or .
and the Menu appears on the display
(vpage 9 "Menu map").
2
Use ui and
"General" – "Clock" – "Auto-
Adjust" – "Adjust Now", then
ENTER
press
The operation to receive the current
time starts.
• The current time is displayed for several seconds when it is
received successfully.
• If the current time is not received successfully, "Connection
Failed" appears.
.
ENTER to select
.
p
or .
ENTER
and to select "Auto-Adjust" –
ENTER or p .
.
ENTER to select
p
or .
11
Setting the general [General]
n Setting the current time (Manual Adjust)
(24-Hour Display)
1
Press SETUP .
Turns on the Menu settings mode
and the Menu appears on the display
(vpage 9 "Menu map").
2
Use ui and ENTER to select
"General" – "Clock" – "Manual
Adjust", then press ENTER or p .
3
ui
Use to set the "hours".
4
ENTER p
Press or .
5
Use ui to set the "minutes".
6
Press ENTER or p .
The current time is set.
Checking the current time when the power is on
CLOCK
Press .
Press once more and the display returns to its original condition.
Checking the current time when the power is set to
standby
CLOCK
Press .
The current time is displayed for 30 seconds.
NOTE
• The time cannot be set when in the standby mode. Turn on the
power first.
• The time setting is canceled if the power cord is disconnected. Set
the time again.