Denon CEOL Piccolo DRA-N5 Owner's Manual page 21

n WPS Settings (PIN code method)
1
Press SETUP .
Turns on the Menu settings mode
and the Menu appears on the display
(vpage 9 "Menu map").
2
Use ui and ENTER to select
"Network" – "Settings" – "WPS
(Wi-Fi Protected Setup)" – "PIN
ENTER p
code", then press or .
The access point you have set is
displayed.
3
ui
Use to select the access point
whose PIN code you want to
ENTER p
display, and press or .
PIN code number is displayed.
4
Set this PIN code to the register.
When connection is established
"Connected!" is displayed.
n Manual Settings
1
Press SETUP
Turns on the Menu settings mode
and the Menu appears on the display
(vpage 9 "Menu map").
2
Use ui and
"Network" – "Settings" –
"Manual", then press
p
.
3
ui
Use to select "SSID", then
press ENTER
4
Use uio p or
the name of the wireless network
(SSID), then press
• The types of characters that can be input are as shown below.
with access point,
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GUpper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! " # $ % & ' ( ) z + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
GNumbersH 0123456789 (Space)
5
Use ui to select "Security", then press
.
ENTER to select
ENTER or
or p .
0 – 9 , +10 to input
ENTER .
ENTER or p
18
Setting the network [Network]
6
Use ui to select following items, then press
p
or .
• None Select if not encrypted. Can also be used even without
encryption, through we recommend encryption for improved
security.
• WEP / WPA(TKIP) / WPA(AES) / WPA2(TKIP) / WPA2(AES)
Select the encryption method according to the encryption setting
of the access point you are using.
7
Use ui to select "Password", then press
8
Use uio p to enter the encryption key, and press
ENTER
.
Enter the same encryption key as used for the access point.
• When no security settings have been used in the Internet
connection settings, this step is not necessary.
• When connecting to a "WEP" encrypted network, set the access
point "Default Key" to "Key 1".
9
Use i to select "Test Connection" and press
or p .
"Wait for the network to connect..." is displayed, and the unit
starts connecting to the network.
• This unit performs automatic network setup due to the DHCP
function.
.
NOTE
This unit is not compatible with WEP (TSN) encryption system.
ENTER
ENTER
.
ENTER