Bushnell FIRST STRIKE 730005 User Manual page 7

ZEROING YOUR FIRST STRIKE REFLEX SIGHT
1. With the scope mounted and with the protective
lens cover (H) removed, rest the gun on a solid
support.
2. Start by sighting along the barrel and aim at a
target 25 to 50 yards away. View through your
electronic sight and gently rotate the windage (F)
and elevation adjustments (E), using the supplied
screwdriver (K), to align the red dot with the target
as seen along the barrel.
3. You should then fire a test shot to determine the
point of impact of your weapon. If you are not
hitting your aiming point (the center of the target)
make an adjustment by turning the windage or
elevation screw(s) in the direction you want the
bullet to move. The chart on the next page will
aid you in determining the proper amount of
adjustment necessary depending upon the range
at which you are shooting.
Adjusting the Windage (F)
7