Radio Operation; Manual Tuning; Automatic Seek Tuning; Manual Storing Of Station Presets - Alpine CVA-1004 Owner's Manual

SOURCE/
PWR BAND/TEL.
g g f f f f f
g g g
TUNE/
A.ME
Example of Radio mode Screen
Selected
Source
Preset button
number for
the stored
station
The current Volume Level
setting status

Manual Tuning

1
Press SOURCE/PWR until a radio band and
frequency appears in the display.
2
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → AM
3
Press TUNE/A.ME repeatedly until "DX SEEK"
and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press g or f to move downward or upward
one step respectively until the desired station
frequency is displayed.
NOTE
The STEREO indicator appears on the monitor when a
Stereo FM station is tuned in.
Preset buttons
(1 through 6)
Station Title
Frequency of
the current
station
Current Time

Radio Operation

Automatic Seek Tuning

1
Press SOURCE/PWR until a radio band and
frequency appears in the display.
2
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → AM
3
Press TUNE/A.ME to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
4
Press g or f to automatically seek for a
station downward or upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.

Manual Storing of Station Presets

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold (for at least 2 seconds) any one
of the preset buttons (1 through 6), into which
you want to store the station. The selected
station is stored. The display shows the band,
preset No. and station frequency memorized.
3
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 18 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM.)
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
9
-EN