DESCRIPTION OF DISPLAY MARKS
DISPLAY MARK
The cuff was inflated to more than 280
mmHg.
Pressurization is not possible
Cuff winding has not been performed
correctly.
The pulse could not be measured ac-
curately.
The arm moved during measurement.
Device has a trouble.
Appears when the pulse could not be
measured.
Appears when the batteries become
weak.
Device has a trouble.
CONDITION / CAUSE
- Eng 12 -
CORRECTIVE ACTION
Exhaust the air with in the cuff.
After winding the cuff over again, re-
peat measurement.
After again winding the cuff, conduct
the measurement without moving.
Repeat the measurement without mov-
ing the arm.
Ask purchased shop.
Repeat the measurement without mov-
ing the arm.
Replace the batteries.
Ask purchased shop.