Table of Contents
Advertisement
Picture and sound control adjustment in the PC mode (continued)
Description about the each setting option:
[Menu 1]
BRIGHTNESS: To adjust the brightness of PC
Monitor-screen.
CONTRAST: To adjust the contrast of PC Monitor-
screen.
HOR POSITION: To adjust the horizontal position of
the image on the PC Monitor-screen. Each video
standard will require a different value for this setting.
VER POSITION: To adjusts the vertical position of
the image on the PC Monitor-screen. Each video
standard will require a different value for this setting.
PHASE: This must be adjusted after the frequency
has been set to optimize picture quality.
CLOCK: To adjust the number of dot clock.
48
Example: Adjust the contrast.
1
During PC mode press
TV MENU once. The
Menu 1 appears on the
TV-screen.
2
Press
or
to select
CONTRAST.
3
Press
or
to adjust
CONTRAST. The bar on
the right side of Menu-
screen will decrease or
increase.
The adjusting screen will
disappear approx. 60
seconds after finishing
an adjustment.
4
Press TV MENU repeatedly until the normal PC-screen
appears on the TV-screen.
CANCEL
Pressing CANCEL while making adjustments will return
BRIGHTNESS and CONTRAST adjustments to the factory preset
levels.
AUTO ADJUST: When you select this and press
ENTER, the HOR POSITION and VER POSITION
are adjusted automatically. At the same time, your
adjusted level will be cancelled. If the result after the
automatic adjustment is not satisfying, manual
correction is possible.
[Menu 2]
RED/GREEN/BLUE: To adjust the color temperature
of PC Monitor-screen.
[Menu 3]
BASS/TREBLE/BALANCE: To adjust the PC-
Audio.
-
+
BRIGHTNESS 0
32 -
+
CONTRAST
0 -
+
HOR POSITION
0 -
+
VER POSITION
PHASE
0 -
+
CLOCK
0 -
+
AUTO ADJUST
-
+
BRIGHTNESS 0
-
+
CONTRAST
32
-
+
HOR POSITION
0
-
+
VER POSITION
0
PHASE
0
-
+
CLOCK
0
-
+
AUTO ADJUST
-
+
BRIGHTNESS 0
-
+
CONTRAST
15
-
+
HOR POSITION
0
-
+
VER POSITION
0
PHASE
0
-
+
CLOCK
0
-
+
AUTO ADJUST
Advertisement
Table of Contents
