Batch Tests - HP Kayak XU700 User Manual

Help on Using Batch
Tests
How to Run a Batch
Test
TIP
NOTE

Batch Tests

You can use the batch test facility to run a pre-defined suite of
advanced tests. Each test in the batch is initiated automatically.
For help on how to use the batch facility, select the command
in the menu.
Help Batch
For help on selecting tests, choose the
commands in the
Selection
First, you must configure the batch test. To do this, use the
submenu in the
Batch
commands:
• Test Selection
• Test Parameters
: to select the tests to include in the batch. This
• Repeat Count
command allows you to set the number of times each test is run, from
0 (do not run test), to 1 (run test once), or more.
To select or deselect any test from the current batch test, use
the command in the
Repeat Count
To run the batch test you have configured, select the
command in the
Batch
The menu also contains these commands:
Batch
: to save the current batch test (with current settings).
• Save Batch
: to load a previously saved batch test.
• Load Batch
: for help on using the batch facility.
• Batch Help
You cannot change the order in which the tests are performed.
You can abort a batch test while it is running by pressing
Edit Batch
menu.
Batch
menu. The
Edit Batch
: for help on how to select the tests for the batch.
: to configure the test parameters.
Edit Batch
menu.
4 Advanced System Tests
Batch Tests
Batch
–
Test
Edit Batch
submenu has these
submenu.
Run Batch
.
English 31