NOTE
Downloading and Installing the Latest Version
You can download the latest version of the DiagTools utility from the
Vectra support web site at:
http://www.hp.com/go/vectrasupport
or the Kayak support web site at:
http://www.hp.com/go/kayaksupport
For more information about the HP web site and for information about
HP Electronic Information Services, refer to page 39.
There are two versions of DiagTools available:
The "Light" stand-alone version. Use this version if you do not have
•
TopTools.
To know if you have TopTools client software on your PC in Windows 95
or Windows NT 4.0, click the
menu.
Programs
The TopTools version. Use this version if you have a recent version
•
of TopTools installed on your PC, or if using the Download function
of TopTools for Desktops Device Manager.
If you have an older version of TopTools that does not have the
page (in the
DiagTools
"Light" stand-alone version.
There are three files available for downloading:
The DiagTools utility. A compressed file (with the extension .EXE)
•
which contains all the files necessary for running DiagTools.
The User's Guide for DiagTools – the document you are reading. It is
•
a PDF file which can be viewed and printed using Adobe's Acrobat
Reader. (The Adobe Acrobat Reader can be downloaded free of
charge from HP's World Wide Web site.)
The labels for the Hardware Diagnostics diskette(s). Once you have
•
created the DiagTools diskette(s), you can use this PDF file to create
the diskette labels. You will not need this file if you are going to run
DiagTools from a hard disk partition.
.
button and look for
Start
menu), or if you are in doubt, use the
Tools
1 Starting DiagTools
Installing and Setting Up DiagTools
in the
HP DMI
English
3