HP Kayak XU700 User Manual page 40

NOTE
CAUTION
4 Advanced System Tests
How to Run an Advanced System Test
Some menus will be disabled if they are not appropriate for your PC. For
example, if you do not have a SCSI controller, the
advanced tests will be disabled.
2 A sub-menu appears, showing the list of tests available for the
selected component. Select the desired test by moving the selection
bar and pressing
3 Depending on the test selected, the test may start immediately.
Alternatively, a window of test parameters is displayed.
To change a test parameter, select the parameter and press
. You can then select between the available values for that
parameter. We recommend that you change these configuration
values only if you are familiar with their meaning and purpose.
To proceed with the test, select
Press to abort the test while it is running. Some tests are critical
and cannot be aborted. If you abort the test, the message
is displayed.
Aborted
Once the test has completed, a window appears indicating the result:
or
Test Passed Test Failed
options so that you can select your next action:
• Return to Main Menu
to run another test.
• Browse Current Test Errors
the test you have just done.
• Browse All Test Errors
since you started the advanced system tests (or since you last erased
the error list).
• Erase Error List
Do not use the
Erase Error List
Support Ticket (test report). The error list is used to create the Support
Ticket.
30 English
.
Continue
. The window also has several command
: to return to the main screen, allowing you
: to browse the errors produced in
: to browse all the errors that have arisen
: to delete the complete list of errors.
command if you want to create a
menu in the
SCSI
.
Test