HP Kayak XA-s 02xx Manual page 23

Completing the
Installation of an ISA
Accessory Board
NOTE
HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation
If you have installed an ISA accessory board that uses an interrupt, you
must run the Setup program and reserve the IRQ for the accessory
board. This allows PCI devices to be automatically configured.
1 Turn on the PC Workstation and press
appears.
2 In the Setup program, select the Advanced menu and the PCI Slot
Configuration submenu. A list of IRQs and the devices that use them
are displayed. Highlight the IRQ field you want to change, for
example
IRQ 11
3 You can use the space bar or press
available for PCI (
( ).
Reserved
4 Press to save any changes you made and exit the Setup
program.
You should always leave at least one IRQ available for use by the
integrated PCI devices.
.
) or make it unavailable for PCI
Available
Installing Accessory Boards
when
Setup
or to make the IRQ
English
23