HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation
Installing Accessory Boards
5 Hold the board by its "top" edge. Slide it into the board guide of the
chosen slot. Do not bend the board.
Slide the accessory
board into position
6 Align the board's connector with the slot's socket. Firmly press the
board into the socket. Ensure the board's connector engages
completely with the socket and does not touch components on
other boards.
7 Secure the board by replacing the screw. If you loosened the screws
on adjacent slots, remember to tighten them.
8 Install any other accessories before replacing the cover (refer to
page 4).
9 Reconnect all cables and power cords.
22
English