On Minitower Models
Removing the Power Supply Unit
Refer to
page 13
for instructions on how to remove and replace the cover. Disconnect the computer's power cord
and LAN cable (if required).
(a)
Unscrew the four self-retaining screws at the back of the
power supply.
(a) Disconnect the fan from the connector near the
right-hand edge of the system board;
(b) Press the retaining buttons on each side of the
airflow guide and lift out of the chassis.
Slide the power supply unit until it stops. Disconnect the power
supply cables, then continue to slide the power supply unit out of the
computer.
Removing and Replacing the Power Supply Unit
(b)
15