Power Supply Unit - HP Kayak XA 05xx Manual

Power Supply Unit

Replacing the Power Supply Unit
Check that all internal cables are safely routed.
Slide the power supply unit back into the
computer until it stops. Reconnect the power
supply cables, then continue to slide the power
supply unit into the computer.
Tighten the four self-retaining screws.
(a) Replace the airflow guide;
(b) Reconnect the fan connector to the system
board.
Power Supply Unit
HP Kayak XA Series 0503 and 0541 Desktop and Minitower PC
Workstations include a 200 W power supply unit with a manual voltage
switch selector. This power supply unit does not support accessory boards
that require a large amount of power.
It should be noted, that the first shipments of HP Kayak XA Series 05xx PC
Workstations included a 260 W automatic voltage selector. However, all
subsequent models are shipped with a 200 W power supply unit.
All documentation and related data sheets to the HP Kayak XA Series 0503
and 0541 PC Workstations, only make reference to 200 W power supply
units.
16