Front I/O Panel Housing Assembly - HP Dx5150 - Compaq Business Desktop Reference Manual

6.11 Front I/O Panel Housing Assembly

1. Prepare the computer for disassembly
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on
3. Disconnect the following three attaching cables from the system board:
❏
power switch/LED cable
❏
front USB cable
❏
front audio cable
4. Remove the two screws 1 that secure the housing to the chassis and then pull the housing 2
away from the chassis.
To install the housing assembly, reverse the removal procedures.
Service Reference Guide, dx5150
Removal and Replacement Procedures— Microtower (MT) Chassis
(Section 6.1, "Preparation for
(Section 6.3, "Access Panel").
361685-001
Disassembly").
6–21