HP Dx5150 - Compaq Business Desktop Reference Manual page 17

Computer Setup (Continued)
Heading Option
Advanced Removable Device Boot
BIOS Features Seq.
Hard Disk Boot Seq.
CD-ROM Boot Seq.
Network Boot Seq.
MBR Security
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Boot Up NumLock Status
Security Option
APIC Mode
MPS Version Control for
OS
HDD S.M.A.R.T. Capability
ASF Support
BIOS Write Protection
Advanced UMA Frame Buffer Size
Chipset
Features
✎
Support for specific Computer Setup options may vary depending on the hardware configuration.
Service Reference Guide, dx5150
Description
Allows you to specify the order in which attached devices
(such as an FDD, an LS120, or a Zip Drive) are checked
for a bootable operating system image.
Allows you to specify the order of attached hard drive
devices (such as USB HDD storage, USB2 DriveKey, or
USB flash media). The first drive in the order has priority
in the boot sequence and is recognized as drive C (if any
devices are attached).
Allows you to specify the order in which attached
CD-ROM drives (including USB ODD) are checked for a
bootable operating system image.
Allows you to specify the order in which network devices
(including UP NIC cards) are checked for a bootable
operating system image.
Enables/disables the VIRUS warning feature for IDE Hard
Disk boot sector protection.
When this function is enabled and someone attempts to
write data into this area, the BIOS responds with a
warning message on screen and an alarm beep.
Enables/disables the system to skip certain tests while
booting.
Enabling this feature decreases the time required to boot
the system.
Allows you to specify which devices will boot first,
second, third, and fourth.
✎
MS-DOS drive lettering assignments may not apply
after a non-MS-DOS operating system has started.
Allows you to set the default NumLock status on or off.
Allows you to set to either Always or Setup.
Enables/disables the APIC support.
Allows you to set the MPS version for the OS.
Enables/disables SMART capability on the hard drive.
Enables/disables ASF
Enables/disables BIOS write protection.
Allows you to set the size of the UMA frame buffer.
361685-001
Setup Utilities and Diagnostics Features
2–5