Zoom Handy recorder H2 Operation Manual page 72

Sd card based recorder
Hide thumbs Also See for Handy recorder H2:
Table of Contents

Advertisement

Connecting the H2 to a Computer
An icon for the SD card in the H2 will appear
on the desktop of the computer, and the card
can be accessed from the computer.
The contents of the folders on the SD card are
as follows.
● SYS
Contains files with various system settings of
the H2.
● FOLDER01 - FOLDER10
Contains audio files recorded in stereo mode.
● 4CH
Contains audio files recorded in 4-channel
mode.
NOTE
Never change or delete the content of the SYS
folder. Otherwise the H2 will not operate
normally.
5.
You can now exchange files
between the computer and the
H2.
To copy audio files from the H2 to the
computer, double-click on the H2 icon shown
on the computer, and access one of the
FOLDER01 – FOLDER10 folders or the 4CH
folder. Then drag & drop the desired file(s) to
the computer.
72
To copy audio files from the computer to the
H2, drag & drop the desired file(s) to one of
the FOLDER01 - FOLDER10 folders or the
4CH folder.
NOTE
• Before you copy files from the computer to
the H2, make sure that the file format,
sampling frequency, and quantization of the
files to be copied are supported by the H2. If
you copy unsupported files, playback is not
possible.
• If you change the names of files in the 4CH
folder, these will no longer be recognized by
the H2. If you copy such files to the
computer and back again to the H2, do not
change the file names.
• In 4-channel mode, a pair of stereo files for
front and rear is always handled together.
When trimming or otherwise editing such
files on a computer, process both files
together.
NOTE
• The H2 will only recognize file names
consisting of alphanumeric characters.
• If you change file names using a generic SD
card reader/writer, the files may no longer be
recognized by the H2.
6.
Cancel the connection between
H2 and computer.
To terminate the connection, cancel the online
condition at the computer.
● When using Windows
Click the "safely remove hardware" icon in
the task tray and select the H2 as the device to
remove.
● When using a Macintosh
Select the H2 icon and drag-and-drop it into
the trash.
ZOOM H2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents